Boris Spokoinyi

Services

We have extensive expertise designing complex RF/Analog systems & components from DC up to mm-wave frequencies for Bluetooth, Wi-Fi, DVB-T/H, GSM, LTE, GPS, and custom proprietary standards. We also do 3D printing at MatterCreator

 

Call us, toll-free, at 1·888·506·8628, or fill out the online form

 

 RF/Microwave Design
 Digital Design
 Layout Services
 Modeling
 Embedded software

 

 

Find us on Google+

We have extensive expertise in designing complex RF systems and components from low frequencies up to and including mm-wave bands for Bluetooth, Wi-Fi, ZigBee, DVB-T/H, GSM, GPS, and custom proprietary standards.

 

 RF/Microwave Design

  • Passive Components: Antennas, Filters, Matching Networks, Splitters/Combiners
  • Active Components: PAs, LNAs, Mixers
  • RF systems: Frequency Synthesizers, Up/Down converters
 

 Digital Design

  • Digital Signal Processing (DSP)
  • Processor interfaces and high speed buses: DDR, 10G Ethernet, JESD204B
  • Experience in Xilinx, Altera, Lattice Semi FPGAs/CPLDs
 

 Layout Services

  • High frequency (up to 60GHz)
  • High density layout (BGA breakout, up to 32 layers)
  • EMC compliance (2D/3D EM simulation)
 

 Modeling & Simulation

  • 2D/3D Electromagnetic simulation (PCB elements, antennas, waveguides).
  • Circuit simulation (RF, analog, digital).
  • System simulation (comunication systems, control, hardware, firmware, DSP).
  • Thermal and Mechanical simulation.
 

 Embedded Software

  • C/C++ coding for Microcontrollers and CPUs.
  • Firmware/Hardware co-development.
  • Digital Signal Processing (DSP) and Control Systems.
 

 3D Printing and modeling at MatterCreator.com

  • SLA printers max build volume (XYZ): 125 x 125 x 165 mm, or 4.9″ x 4.9″ x 6.5″ (inch). Min feature size: 300 microns, min layer thickness: 25 microns (1 mil). Resin types: Grey, White, Translucent, Strong, Castable.
  • Multiple FDM Printers width dual-extruders. Max build volume is 300 x 300 x 400mm, or 11.8″ x 11.8″ x 19.6″ (inch). Min feature size: 0.4mm (nozzle diameter), layer height: 0.1 mm – 0.3 mm. PLA Colours:  Black, White, Orange, Grey, Silver, Transparent, Red, Pink, Blue (Dark/Light), Brown, Bronze-color, Yellow, Green (Dark/Light). ABS Colours:  Black, Grey, White, Silver, Orange.